LEVel
Command For EDGE trigger mode:
:TRIGger:[M OD E EDGE:SOURce CH AN nel<N>;]
LEVel<value>
For PATTern trigger mode:
:TRIGger:[MODE PATTern:PATH CHANnel<N>;]
LEVel<value>
The LEVel command sets the trigger level voltage for the selected source or
path. This command cannot be used in the IMMediate trigger mode. In
EDGE trigger mode, the SOURce command is used; in PATTern mode, the
trigger PATH is used for the trigger level source. The LEVel command in
PATTern trigger mode sets the high/low threshold for the pattern.
<N> {1|2}
<value> Trigger level in volts
Example For EDGE trigger mode:
OUTPUT XXX;":TRIG :MODE EDGE;SOUR CHAN1; LEV 1.0"
For PATTern trigger mode:
OUTPUT XXX;":TRIG:MODE PATTERN;PATH CHANNEL2;LEVEL 1.0"
TRIGger Subsystem
LEVel
35-8