SLAVe
Command :MACHine{1|2}:SFORmat:SLAVe

<clock_id>,<clock_spec>

The SLAVe clock command allows you to specify a slave clock for a given
machine. The slave clock is only used in the Slave and Demultiplexed
clocking modes. Each command deals with only one clock (J,K,L,M);
therefore, a complete clock specification requires four commands, one for
each clock. Edge specifications (RISing, FALLing, or BOTH) are ORed.
When slave clock is being used at least one edge must be specified.
<clock_id> {J|K|L|M}
<clock_spec> {OFF|RISing|FALLing|BOTH}
Example OUTPUT XXX;":MACHINE2:SFORMAT:SLAVE J, RISING"
Query :MACHine{1|2}:SFORmat:SLAVe?<clock_id>
The SLAVe query returns the clock specification for the specified clock.
Returned Format [:MACHine{1|2}:S FO Rmat:SLAVe] <clock_i d>,<clock_spec><NL >
Example OUTPUT XXX;":MACHINE2:SFORMAT:SLA VE? K"
SFORmat Subsystem
SLAVe
15–14