INSert
Command :DISPlay:INSert {[2,]<label> | 1,<label>,<bit_id>}
The INSert command inserts waveforms into the current display.
Time-correlated waveforms from the logic analyzer may be added to the
current display. The waveforms are added just below any currently displayed
signals. Only two oscilloscope waveforms can be displayed at any time.
The first parameter is optional when inserting an oscilloscope waveform. The
parameter specifies the instrument from which the waveform is to be taken.
If an instrument is not specified, the oscilloscope is assumed. The second
parameter is the label of the waveform that is to be added to the current
display. If you specify the waveform is from the analyzer by setting the first
parameter to 1, then you must also specify which bit.
<label> string of 1 alpha and 1 numeric character enclosed by single quotes for
oscilloscope waveforms or a string of up to 6 alphanumeric characters
enclosed by single quotes for analyzer waveforms.
<bit-id> integer from 0 to 31
Example OUTPUT XXX;":DISPLAY:INSERT ’C1’"
OUTPUT XXX;":DISPLAY:INSERT 1,’WAVE’,10"
For a complete explanation of the label name and the <bit_id> for the logic
analyzer, refer to chapter 15, "SFORmat Subsystem."
DISPlay Subsystem
INSert
31-6