Agilent Technologies 1670G MINus, OVERlay

MINus
Command :DISPlay:MINu s [<module_num be r>,]<label>, <l abel>
The MINus command algebraically subtracts one channel from another and
inserts the resultant waveform on the display. The first parameter is an
optional module specifier, always 2 for the oscilloscope. The next two
parameters are the labels of the waveforms selected to be subtracted. The
label names are defined in the same manner as the INSert command.
You cannot subtract analyzer waveforms.
<module_
number> Always 2
<label> string of 1 alpha and 1 numeric character enclosed by single quotes
Example OUTPUT XXX;":DISPLAY:MINUS 2,’C1’ ,’ C2’"
OVERlay
Command :DISPlay:OVERlay <label>,<label>
The OVERlay command overlays oscilloscope waveforms. The syntax
parameters are the labels of the waveforms that are to be overlaid. A label
may be used only once with each OVERlay command.
<label> string of 1 alpha and 1 numeric character enclosed by single quotes
Example OUTPUT XXX;":DISPLAY:OVERLAY ’C1’ ,’ C2’"
DISPlay Subsystem
MINus
31-8