Agilent Technologies 1670G Command Set Organization

Command Set Organization
The command set for the Agilent 1670G pattern generator is divided into four
separate subsystems. The subsystems are: FORMat, SEQuence, MACRo, and
the SYMBol subsystem. Each of the subsystems commands are covered in
their individual sections later in this chapter.
Each of these sections contain a description of the subsystem, syntax
diagrams and the commands in alphabetical order. The commands are
shown in long form and short form using upper and lower-case letters. For
example, FORMat indicates that the long form of the command is FORMAT
and the short form is FORM. Each of the commands contain a description of
the command and its arguments, the command syntax, and a programming
example.
The following figure shows the command tree for the pattern generator.
Pattern Generator Command Tree
Programming the Pattern Generator
Command Set Organization
37–5