REMove
Command :MACHine{1|2}:SFORmat:REMove {<name>|ALL}
The REMove command allows you to delete all labels or any one label for a
given machine.
<name> string of up to 6 alphanumeric characters
Example OUTPUT XXX;":MACHINE2:SFORMAT:REM OVE ’A’"
OUTPUT XXX;":MACH IN E2:SFORMAT:REMOVE AL L"
SETHold
Command :MACHine{1|2}:SFORmat:SETHold

<pod_num>,<set_hold_value>

The SETHold (setup/hold) command allows you to set the setup and hold
specification for the state analyzer.
Even though the command requires integers to specify the setup and hold,
the query returns the current settings in a string. For example, if you send
the integer 0 for the setup and hold value, the query will return 3.5/0.0 ns as
an ASCII string when you have one clock and one edge specified.
<pod_num> {0|1|2|3|4|5|6|7|8}
<set_hold_
value> {0|1|2|3|4|5|6|7|8|9} representing the setup and hold values shown
in Table 9-2 on the next page.
Example OUTPUT XXX;":MACHINE2:SFORMAT:SETHOLD 1,2"
SFORmat Subsystem
REMove
15–12