PATH
Command :TRIGger:[MOD E PATTern;]PAT H CH ANnel<N>
The PATH command is used to select a trigger path for the subsequent
LOGic and LEVel commands. This command can only be used in the
PATTern trigger mode.
<N> {1|2}
Example OUTPUT XXX;":TRIGGER:PATH CHANNEL1"
Query :TRIGger:PATH?
The PATH query returns the current trigger path.
Returned Format [:TRIGger PATH] CHAN ne l<N><NL>
Example OUTPUT XXX;":TRIGGER:PATH?"
SLOPe
Command :TRIGger:[MOD E EDGE;SOURce CH AN nel<N>;]SLOP e

{POSitive|NEGative}

The SLOPe command selects the trigger slope for the specified trigger
source. This command can only be used in the EDGE trigger mode.
<N> {1|2}
Example OUTPUT XXX;":TRIG:SOUR CHAN1;SLOP POS"
TRIGger Subsystem
PATH
35-12