Introduction
SYSTem subsystem commands control functions that are common to
the entire Agilent 1670G-series logic analyzer, including formatting
query responses and enabling reading and writing to the advisory line
of the instrument. The command parser in the Agilent 1670G-series
logic analyzer is designed to accept programs written for the 16500
logic analysis system with an 16550A logic analyzer module.
Refer to figure 11-1 and table 11-1 for the System Subsystem
commands syntax diagram and parameter values. The SYSTem
Subsystem commands are
•DATA
•DSP
•ERRor
•HEADer
•LONGform
•PRINt
•SETup
11–2