Agilent Technologies 1670G STARt, STOP

STARt
Command :STARt
The STARt command starts the logic analyzer running in the specified run
mode (see RMODe).
The STARt command is an overlapped command. An overlapped command is a
command that allows execution of subsequent commands while the device
operations initiated by the overlapped command are still in progress.
Example OUTPUT XXX;":START"
STOP
Command :STOP
The STOP command stops the logic analyzer.
The STOP command is an overlapped command. An overlapped command is a
command that allows execution of subsequent commands while the device
operations initiated by the overlapped command are still in progress.
Example OUTPUT XXX;":STOP"
Instrument Commands
STARt
9–22