Agilent Technologies 1670G TPOSition (Trigger Position)

TPOSition (Trigger Position)
Command :MACHine{1|2}:TTRigger:TPOSition
{STARt|CENTer|END|DELay,<time_val> |
POSTstore,<poststore>}
The TPOSition command sets the trigger at the start, center, end or any
position in the trace (poststore). Poststore is defined as 0 to 100 percent
with a poststore of 100 percent being the same as putting the trigger start
position and a poststore of 0 percent being the same as ending the trace with
the trigger.
The DELay mode sets the time between the trigger point and the start of the
trace, causing the trace to begin after the trigger point.
<time_val> real number from either (2 × sample period) or 16 ns, whichever is greater, to
(516096 × sample period).
<poststore> integer from 0 to 100 representing percentage of poststore.
Example OUTPUT XXX;":MACHINE1:TTRIGGER:TP OSITION END"
OUTPUT XXX;":MACH IN E1:TTRIGGER:TPOSIT IO N POSTstore,75"
Query :MACHine{1|2}:TTRigger:TPOSition?
The TPOSition query returns the current trigger position setting.
Returned Format [:MACHine{1|2}:TTRigger:TPOSition] {STARt|CENTer|END|DELay,
<time_val>|POSTstore,<poststore>}<NL>
Example OUTPUT XXX;":MACHINE1:TTRIGGER:TP OSITION?"
TTRigger (TTRace) Subsystem
TPOSition (Trigger Position)
22–22