Agilent Technologies 1670G TWAVeform , ACCumulate

TWAVeform
Selector :MACHine{1|2}:TWAVeform
The TWAVeform selector is used as part of a compound header to access the
settings found in the Timing Waveforms menu. It always follows the
MACHine selector because it selects a branch below the MACHine level in the
command tree.
Example OUTPUT XXX;":MACH INE1:TWAVEFORM:D ELAY 100E−9"
ACCumulate
Command :MACHine{1|2}:TWAVeform:ACCumulate <setting>
The ACCumulate command controls whether the waveform display gets
erased between each individual run or whether subsequent waveforms are
displayed over the previous ones.
<setting> {0|OFF} or {1|O N}
Example OUTPUT XXX;":MACHIN E1:TWAVEFORM:ACC UMULATE ON"
Query :MACHine{1|2}:TWAVeform:ACCumulate?
The ACCumulate query returns the current setting. The query always shows
the setting as the characters, "0" (off) or "1" (on).
Returned Format [:MACHine{1|2}:TWAVeform:ACCumulate] {0|1}<NL>
Example OUTPUT XXX;":MACHIN E1:TWAVEFORM:ACC UMULATE?"
TWAVeform Subsystem
TWAVeform
23–7