ACCumulate
Command :MACHine{1|2}:SWAVeform:ACCumulate
{{ON|1}|{OFF|0}}
The ACCumulate command allows you to control whether the waveform
display gets erased between individual runs or whether subsequent
waveforms are displayed over the previous waveforms.
Example OUTPUT XXX;":MACHIN E1:SWAVEFORM:ACC UMULATE ON"
Query MACHine{1|2}:SWAVeform:ACCumulate?
The ACCumulate query returns the current setting. The query always shows
the setting as the characters, "0" (off) or "1" (on).
Returned Format [MACHine{1|2}:SW AV eform:ACCumulate] {0 |1}<NL>
Example OUTPUT XXX;":MACHIN E1:SWAVEFORM:ACC UMULATE?"
ACQuisition
Command :MACHine{1|2}:SWAVeform:ACQuisition
{AUTOmatic|MANual}
The ACQuisition command allows you to specify the acquisition mode for the
state analyzer. The acquisition modes are automatic and manual.
Example OUTPUT XXX;":MACH INE2:SWAVEFORM:A CQUISITION AUTOM ATIC"
SWAVeform Subsystem
ACCumulate
18–5