Agilent Technologies 1670G {STARt|CENTer|END|DELay, <time_val>| POSTstore,<percent>}

TMAXimum
Query :MACHine{1|2}:TWAVeform:TMAXimum?
The TMAXimum query returns the value of the maximum time between the X
and O markers. If there is no valid data, the query returns 9.9E37.
Returned Format [:MACHine{1|2}:TWAVeform:TMAXimum] <time_value><NL>
<time_value> real number
Example OUTPUT XXX;":MACHIN E1:TWAVEFORM:TMA XIMUM?"
TMINimum
Query :MACHine{1|2}:TWAVeform:TMINimum?
The TMINimum query returns the value of the minimum time between the X
and O markers. If there is no valid data, the query returns 9.9E37.
Returned Format [:MACHine{1|2}:TWAVeform:TMINimum] <time_value><NL>
<time_value> real number
Example OUTPUT XXX;":MACHIN E1:TWAVEFORM:TMI NIMUM?"
TPOSition
Command MACHine{1|2}:TWAVeform:TPOSition
{STARt|CENTer|END|DELay, <time_val>|
POSTstore,<percent>}
The TPOSition command controls where the trigger point is placed. The
trigger point can be placed at the start, center, end, a percentage of
poststore, or a value specified by delay. The poststore option is the same as
TWAVeform Subsystem
TMAXimum
23–19