Introduction
The Channel Subsystem commands control the channel display and
the vertical axis of the oscilloscope. Each channel must be
programmed independently for all offset, range, and probe functions.
When ECL or TTL commands are executed, the vertical range, offset,
and trigger levels are automatically set for optimum viewing. Refer to
figure 30-1 for the CHANnel Subsystem Syntax Diagram. The
CHANnel Subsystem commands are:
•COUPling
•ECL
•OFFSet
•PROBe
•RANGe
• TTL
This chapter applies only to the oscilloscope option.
30-2