Chapter 6: Services Menu
140
Port number the SNMP
agent will listen to
Use this parameter to specify the port
number for SNMP. The range is 1 to
65535. The default is 161.
Allow SNMP set requests Use this parameter to either permit or
deny managers to use the read-write
community string to change the
parameter settings of the access point.
The choices are described here:
Enabled; Check this option to permit
managers to use the read-write
community string to change the
parameter settings of the access point.
Disabled: Check this option to prevent
managers from using the read-write
community string to change the
parameter settings. If you click this option,
the read-write community string acts as a
read-only community string, giving you
two read-only strings on the access point.
Read-write community
name (for permitted SNMP
set operations)
Use this parameter to specify the read-
write community string. Here are the
guidelines:
Managers may use this community string
to both view and change the parameter
settings on the access point, unless the
previous option “Allow SNMP set
requests” is disabled.
The community string may be from 1 to
256 characters.
You may specify only one read-write
community string.
The community string may contain both
letters and numbers,
The community string may not contain
spaces.
Table 24. SNMP (Continued)
Field Description