Chapter 3: Manage Menu
Figure 23. Configure MAC Filtering of Client Stations Window
2.For the Filter parameter, select one of the following:
Allow only stations in list: Select this option if you want the access point to accept association requests from the wireless clients whose MAC addresses you enter in the filter, and to reject association requests from all other clients.
Block all stations in list: Select this option if you want the access point to reject association requests from the wireless clients whose MAC addresses you enter in the filter, and to accept association requests from all other clients.
3.To enter the MAC addresses of the clients, use the fields next to the Add button. After entering an address, click the Add button. You may enter only one address at a time. You may not enter broadcast or multicast addresses.
4.If you want to remove an address, click the address in the list and then the Remove button. You may remove only one address at a time.
5.After adding the MAC addresses, click the Update button to activate and save your changes on the access point.
6.From the Manage menu, select VAP.
7.In the Modify virtual access point settings window, use the MAC Filtering column to activate filtering on the individual VAPs.
For further information on the window, refer to “Configuring Virtual Access Points” on page 54.
78
