Chapter 6: Services Menu
Table 24. SNMP (Continued) | |
|
|
Field | Description |
|
|
|
|
| You may specify a subnet to allow all |
| management workstations in the subnet |
| to use SNMP to access the device. The |
| subnet is specified in this format: |
| address/mask |
| You may specify the actual mask or the |
| mask length. Here is an example of a |
| subnet specified by the actual mask: |
| 149.24.42.0/255.255.255.0 |
| Here is the same subnet, specified by |
| mask length: |
| 149.24.42.0/24 |
|
|
Community name for traps | Use this field to specify the community |
| name the access point should use to |
| transmit traps. |
|
|
Trap type to send | Use these options to specify which traps |
| the access point should transmit. The |
| options are described here: |
| Coldstart: This trap is sent when the |
| SNMP agent is started. |
| Link: This trap is sent when a radio is |
| enabled or disabled. |
| Authentication: This trap is sent when an |
| SNMP authentication fails. |
| Association: This trap is sent when |
| wireless clients connect to or disconnect |
| from the access point. |
| Unknown AP: This trap is sent when the |
| access point detects a rogue access |
| point. |
|
|
142
