Allied Telesis AT-TQ2450 manual 152

Chapter 6: Services Menu

6.If the location of the access point observes daylight savings time, click the dialog box for the Adjust Time for Daylight Savings parameter. The window displays the fields in Figure 50.

Figure 50. Daylight Savings Time Fields

If the area does not observe Daylight Savings time, leave the dialog box empty and go to step 10.

7.Use the pull down menus in DST Start to set the date and time for the start of Daylight Savings time.

8.Use the pull down menus in DST End to set the date and time for the end of Daylight Savings time.

9.Select the DST Offset field and enter the number of minutes to adjust the time at the start and end of Daylight Savings time. The default is 60 minutes.

10.Click the Update button to activate and save your changes on the access point.

152