|
|
Table 24. SNMP (Continued) | |
|
|
Field | Description |
|
|
|
|
Trap type to send | - Filtered STA: This trap is sent when the |
(continued) | access point blocks an unauthorized |
| wireless client from accessing the network |
| because the client is not authorized by the |
| MAC address filter. |
| - RADIUS Authentication (Success): This |
| trap is sent when a wireless client |
| successfully logs on the network using |
| RADIUS. |
| - RADIUS Authentication (Fail): This trap |
| is sent when a wireless client fails to log |
| on successfully using RADIUS. |
|
|
Hostname or IP address | Specify the SNMP trap receivers to |
| receive traps from the access point. Here |
| are the guidelines: |
| You may specify up to three trap |
| receivers. |
| You may specify only one trap receiver |
| per field. |
| You have to click the Enabled dialog box |
| before you can enter or modify a trap |
| receiver. |
| You may specify a trap receiver by its IP |
| address or DNS hostname. |
| You may not specify an IP address range. |
|
|
143
