Chapter 3: Manage Menu
Table 6. WPA Enterprise (Continued)
Field | Description |
|
|
|
|
Secondary RADIUS IP | Enter the IPv4 address of a secondary |
Address | RADIUS server. This field is optional. The |
| access point sends authentication |
| requests to this address if the primary |
| RADIUS server does not respond to |
| requests. |
|
|
RADIUS Key | Enter the shared secret key for the |
| primary RADIUS server. The key can be |
| up to 128 characters and can consist of |
| letters, numbers, and special characters. |
| The key is |
| be same on the access point and server. |
|
|
Secondary RADIUS Key | Enter the shared secret key for the |
| secondary RADIUS server. |
|
|
RADIUS Port (Range: 0 - | Enter the RADIUS port number of the |
65535) | RADIUS server. If you entered IP |
| addresses for both primary and |
| secondary servers, the units must be |
| using the same port number. The default |
| is 1812. |
|
|
RADIUS Accounting Port | Enter the RADIUS accounting port |
(Range: 0 - 65535) | number of the RADIUS server. If you |
| entered IP addresses for both primary and |
| secondary servers, the units must use the |
| same accounting port number. The |
| default is 1813. |
|
|
Enable RADIUS | Enable or disable RADIUS accounting by |
Accounting | clicking the dialog box. The feature is |
| enable when the dialog box has a check |
| mark and disabled when the dialog box is |
| empty. The default setting for accounting |
| is disabled. |
|
|
Require VLAN ID in | Enable this option to require that the |
Dynamic VLAN | wireless clients of the VAP be assigned |
| VLAN IDs from the RADIUS server. When |
| this option is enabled, the VAP does not |
| accept clients that are not assigned VLAN |
| IDs by the RADIUS severs. The option is |
| enabled when it has a check mark. The |
| default setting is disabled. |
|
|
64
