Chapter 6: Services Menu

Enabling or Disabling the LEDs

You may turn off the LEDs on the front panel of the access point when you are not using them to monitor or troubleshoot the device. The default setting for the LEDs is on.

To turn the LEDs on or off, perform the following procedure:

1.From the Services menu, select LED.

The unit displays the “Control LEDs” window, shown in Figure 44.

Figure 44. Control LEDs Window

2.Click the On dialog circle to turn on the LEDs and Off to turn them off.

3.Click the Update button to activate and save your changes on the access point.

144

Page 144
Image 144
Allied Telesis AT-TQ2450 manual Enabling or Disabling the LEDs