Allied Telesis AT-TQ2450 manual Tkip

		AT-TQ2450 Wireless Access Point User’s Guide
	Table 6. WPA Enterprise
Field		Description
WPA Versions		Select the WPA version. The options are
		listed here:
		- WPA: Select this option if all the wireless
		clients of the VAP support WPA, but not
		WPA2.
		- WPA2: Select this option if all the clients
		support WPA2, but not WPA. This is the
		default setting.
		- Both WPA and WPA2 - Select both
		options if the VAP has both WPA and
		WPA2 clients.
		- Enable-pre-authentication: Select this
		option if the VAP has WPA2 clients and
		you want the access point to share the
		pre-authentication packets from the
		clients with other access points. This can
		speed up authentication for roaming
		clients who connect to multiple access
		points. This option does not apply to WPA
		clients.
Cipher Suites		Select the cipher suite for the VAP, The
		options are listed here:
		- TKIP
		- CCMP (AES)
		- Both TKIP and CCMP (AES)
		When both TKIP and CCMP (AES) are
		selected, clients configured to use WPA
		with RADIUS must have one of the
		following:
		- A valid TKIP RADIUS IP address and
		RADIUS key.
		- A valid CCMP (AES) IP address and
		RADIUS key.
RADIUS IP Address		Enter the IPv4 address of the primary
		RADIUS server.

63