AT-TQ2450 Wireless Access Point User’s Guide

Enabling or Disabling the Reset Button

This section explains how to enable or disable the Reset button on the rear panel of the access point. The Reset button is used to restore the default settings to the device. The default setting for the button is enabled.

If the unit is installed in a non-secure area, you might disable the button to prevent unauthorized individuals from pressing it and disrupting the operations of your wireless network.

Note

If you disable the Reset button and forget the manager account password, you will not be able to manage the unit with the web browser interface.

To enable or disable the Reset button, perform the following procedure:

1.From the Maintenance menu, select Configuration.

The access point displays the “Manage this Access Point’s Configuration” window in Figure 52 on page 157.

2.In the To Disable RESET Button section of the window, click the Yes dialog circle to disable the button or the No dialog circle to enable it.

3.Click the Update button to activate and save your changes on the access point.

161

Page 161
Image 161
Allied Telesis AT-TQ2450 manual Enabling or Disabling the Reset Button