No Security
IEEE 802.1x Security
AT-TQ2450 Wireless Access Point User’s Guide
The None security level is intended for VAPs with wireless clients that do not require encryption or authentication. This is the default setting.
The guidelines for IEEE 802.1x security are listed here:
This security method requires an external RADIUS server capable of EAP.
The authentication server must have Protected EAP (PEAP) and MSCHAP V2 to support Windows clients.
The clients and VAPs must use the same authentication method.
The IEEE 802.1x security parameters are shown in Figure 10 and described in Table 4.
Figure 10. 802.1x Authentication for VAPs
Table 4. IEEE 802.1x
Field | Description |
|
|
|
|
RADIUS IP Address | Enter the IPv4 address of the primary |
| RADIUS server. |
|
|
Secondary RADIUS IP | Enter the IPv4 address of the secondary |
Address | RADIUS server. This field is optional. The |
| access point sends authentication |
| requests to this address if the primary |
| RADIUS server does not respond to |
| requests. |
|
|
57
