Chapter 3: Manage Menu
Table 2. Modify Wireless Settings Window
Field | Description |
|
|
|
|
Radio On Off | Enables or disables the radio. The |
| selections are described here: |
| - On: Enables the radio. You have to |
| enable a radio before you can configure |
| its parameter settings. |
| - Off: Disables the radio. This is the |
| default setting. |
|
|
MAC Address | Displays the MAC address of the radio. |
| This value cannot be changed |
|
|
Mode | Specifies the Physical Layer (PHY) |
| standard of the radio. The available |
| modes depend on the radio and country. |
| The modes are: |
| - IEEE 802.11a: The access point accepts |
| only 802.11a clients. |
| - IEEE 802.11b/g: The access point |
| accepts only 802.11b and 802.11g clients. |
| - IEEE 802.11a/n: The access point |
| accepts only 802.11a and 802.11n clients |
| operating at 5 GHz. This is the default |
| setting for the 5 GHz radio. |
| - IEEE 802.11b/g/n: The access point |
| accepts 802.11b, 802.11g, and 802.11n |
| clients operating at 2.4 GHz. This is the |
| default setting for the 2.4 GHz radio. |
| - 2.4 GHz IEEE 802.11n: The access |
| point accepts only 802.11n clients |
| operating at 2.4 GHz. |
| - 5 GHz IEEE 802.11n: The access point |
| accepts only 802.11n clients operating at |
| 5 GHz. |
|
|
40
