Allied Telesis AT-TQ2450 manual Menu Menu Selection Shared Parameters Non-shared

Chapter 4: Cluster Menu

Table 11. Shared and Non-shared Parameters on the Access Points in a Cluster (Continued)

Menu	Menu Selection	Shared Parameters	Non-shared
			Parameters
	Pre-configured	- AP Detection for Radio	- Access Points List
	Rogue AP	- Rogue AP Interval
	Managed Access	None	- Managed AP
	Point		Administrative Mode
			- Controller IP Address
			- Base IP Port
			- Pass Phrase
			- WDS Managed Mode
			- WDS Managed
			Ethernet Port
			- WDS Group Password
Cluster	Access Points	None	- Location
			- Cluster Name
	Channel	- Stop or start channel
	Management	management
		- Lock channels
		- Advanced parameters
Status	Events	- TQ2403 Compatible	- Persistence
		- Relay Log	- Severity
		- Relay Host	- Depth
		- Relay Port	- Event Messages are
			not shared among the
			units of the cluster and
			have to be viewed from
			individual management
			sessions of the units.
	Transmit/Receive	None	Statistics are not shared
			among the units of the
			cluster and have to be
			viewed from individual
			management sessions
			of the units.
	Client Associations		This menu selection
			only displays the clients
			of the current access
			point. To view the
			clients of a cluster, refer
			to “Viewing the Wireless
			Clients of the Cluster”
			on page 101

90