|
|
Table 3. Modify Radio Settings Window (Continued) | |
|
|
Parameter | Description |
|
|
|
|
Broadcast/Multicast Rate | Enables or disables rate limiting of |
Limiting | broadcast and multicast packets. Here are |
| the guidelines |
| - To activate rate limiting, click the dialog |
| box to add a check mark. To deactivate |
| rate limiting, click the box to remove the |
| check mark. The default setting is |
| disabled. |
| - The Rate Limit parameter defines the |
| maximum number of broadcast and |
| multicast packets per second of the |
| access point. The parameter has a range |
| of 1 to 50 packets per second. The default |
| is 50 packets per second. |
| - The Rate Limit Burst parameter allows |
| intermittent bursts of traffic on the access |
| point above the rate limit. The default is |
| 75 packets per second. |
| - The Rate Limit Burst parameter must be |
| greater than the Rate Limit parameter. |
|
|
53
