Allied Telesis AT-TQ2450 manual Field Description

Chapter 3: Manage Menu

Table 4. IEEE 802.1x (Continued)
Field	Description
RADIUS Key	Enter the shared secret key for the
	primary RADIUS server. The key can be
	up to 128 characters and can consist of
	letters, numbers, and special characters.
	The key is case-sensitive. This key must
	be the same as the key on the server.
Secondary RADIUS Key	Enter the shared secret key for the
	secondary RADIUS server.
RADIUS Port (Range: 0 -	Enter the RADIUS port number of the
65535)	RADIUS server. If you entered IP
	addresses for both primary and
	secondary servers, the units must use the
	same port number. The default is 1812.
RADIUS Accounting Port	Enter the RADIUS accounting port
(Range: 0 - 65535)	number of the RADIUS server. If you
	entered IP addresses for both primary and
	secondary servers, the units must use the
	same accounting port number. The
	default is 1813.
Enable RADIUS	Enable or disable RADIUS accounting by
Accounting	clicking the dialog box. The feature is
	enable when the dialog box has a check
	mark and disabled when the dialog box is
	empty. The default setting for accounting
	is disabled.
Require VLAN ID in	Enable or disable whether wireless clients
Dynamic VLAN	receive their VIDs from their accounts on
	the RADIUS server. When the dialog box
	has a check mark, the feature is enabled
	and the wireless clients receive their VIDs
	from the RADIUS server when they are
	authenticated. The feature is disabled
	when the dialog box is empty. The default
	setting is disabled.
Broadcast Key Refresh	Specify the refresh rate for the broadcast
Rate (Range: 0 - 86400)	(group) key for the clients of the VAP. The
	range is 0 to 86400 seconds. The default
	is 0 seconds. The value 0 disables to
	refresh rate so that the broadcast key is
	not refreshed.

58