Chapter 3: Manage Menu
The encryption parameters are described in the following sections:
“Static WEP” on page 74
“WPA Personal” on page 75
7.After configuring the encryption settings, click the Update button to activate and save your changes on the access point.
8.Log off to end your management session on the access point.
9.Start a management session on the other access point of the WDS bridge.
10.Repeat “Preparing the Access Point for the WDS Bridge” on page 71 and this procedure to configure the WDS bridge on the other access point. Be sure to assign the same values to the parameters.
Static WEP The static WEP parameters are shown in Figure 21 and described in Table 9.
Figure 21. Static WEP on WDS Bridges
Table 9. Static WEP on WDS Links
Field | Description |
|
|
|
|
Key Length | Select either 64 or 128 bits for the key |
| length. The default is 128 bits. |
|
|
Key Type | Select either ASCII or hexadecimal for the |
| key type. The default is hexadecimal. |
|
|
74
