APC AXFA11G user manual Sub-item Major item, Search Mode Selection C, Modified value

Sub-item	Major item	C:Basic Setup
	Sub-item	49:Flow User Span
Parameter
		10:Tag No
Search Mode	selection (C)
		11:Flow Damping

Selection of the appropriate parameter

Parameter	Current setting value	C10:Tag No
		Fl-1101
Replacement Mode
	Modified value		l-1101

X4

Current setting value	C10:Tag No
	Fl-1101
	Fl-1 01

C10:Tag No

Fl-1201

5. BASIC OPERATING PROCEDURES

Upon selection of C: Basic Setup, the cursor will

be positioned at C10: Tag No. (Sub-item selection screen (C))

Touch the switch to access Parameter Replacement Mode.

The cursor will flash on and off on the left of the tag number. As “FI-1201” is to be setup in this example,

touch the switch to move the cursor to the position for multiples of 100.

At the position for multiples of 100, touch the

switch to change the “1” to “2”. When the setting has been changed to “FI-1201”, touch the switch.

When the switch is touched, the entire display flashes on and off. Confirm that the setting has been correctly changed to “FI-1201”, and then

fix this setting by touching the switch once again.

Sub-item

Parameter

Search Mode

Major item

Sub-item selection (C)

C:Basic Setup 49:Flow User Span 10:Tag No

11:Flow Damping

FR

108.0 l/min

0 : : : 100 Fl-1201 TAG

The system returns automatically to sub-item selection screen (C).

After returning to Display Mode by touching using

the ( and ) twice as escape switches, it will be possible to confirm the modified content (if

F0506-2.EPS

Display Select has been setup to display the tag number.)

Indicates selection of Tag No display for B42: Display Select3.

5-9 IM 01E20C01-01E