APC AXFA11G user manual Revision Record, Edition Date Revised item

REVISION RECORD

Title: AXFA11G Magnetic Flowmeter Remote Converter

[Hardware Edition/Software Edition]

Manual No.: IM 01E20C01-01E

Edition	Date	Page		Revised item
5th	Oct. 2006	2-1	2.2	Added the fuse of “Power supply code 2 (24 V AC/DC)”.
		4-1	4.1	Added the caution note of route the power and output signal cable.
		4-5	4.4.4	Added the important note for a 24 V power supply version (power
				supply code 2).
				Added the item “(2) Required Power Supply Voltages”.
		4-8		Added the important note on pulse rate range of active pulse output.
		5-1	5.1	Added the important note on operation display unit and write protection
				function.
		5-3	5.2.1	Corrected the flow chart.
		6-3 to 6-7		Corrected the data range from “0.00001” to “0.0001”.
				(B23, C42, C49, F30 to F36)
				Corrected the position of decimal point from “0 to 5” to “0 to 4”
				(B23, B31, B33, C42, C46, C49, D11, E11, F30 to F36)”
				Corrected the position of decimal point from “0 to 5” to “0 to 2”. (C32)
		6-30	J10, J11, J12	Added the sentence about indications action of display unit.
		6-32	J31	Added the parameter setting table for “Power supply code 2”.
		7-3	7.2.1	Corrected the “Receiving instrument” of “Figure 7.2”
				Added the important note on write protection function.
		8-1		Added the important note on write protection function.
		11-1		Corrected the “Protection”.
		11-4		Corrected the “Safety Requirement Standards”.
				Corrected the “EMC Conformity Standards”.
				Added the item of “Power supply code 2” to “NORMAL OPERATING
				CONDITION”.
				Added the fuse of “Power supply code 2 (24 V AC/DC)” to
				“ACCESSORIES”.
		11-5		Added the code “-2 (24 V AC/DC)” to “MODEL AND SUFFIX CODE”.
		11-6		Added the note for “Power supply code 2 (24 V AC/DC)” to optional
				code A (Lightning protector).

IM 01E20C01-01E