5. BASIC OPERATING PROCEDURES
5.2 Display Unit Setting Methods
NOTE
Before changing any settings, be sure to check the corresponding setting details in Chapter 6: Parameter Description.
5.2.1 Display Mode → Setting Mode
Display Mode will be adopted when the power is turned on, and the Setting Mode can be activated using the following procedure.
|
| Parameter Search Mode |
| ||
|
| Select “Yes” |
|
| |
(2 seconds or more) |
|
|
| ||
Display Mode | Entry Mode | Major Item Parameter | Parameter | ||
Search Mode | Search Mode | Replacement Mode | |||
|
| ||||
|
|
| + | + | |
| Select “No” |
| Setting modes |
| |
|
|
|
| ||
|
| * The term "mode" is used to refer to a situation | |||
|
| where display and setting are possible. |
| ||
| + |
|
|
| |
|
| Press the SET switch while holding down the SHIFT switch. | F0502.EPS | ||
Sample Display: Procedure for moving from Display Mode to Setting Mode
Start:
Display Mode
Entry Mode
The Entry Mode will be omitted for a period of 1 minute when returning from the Setting Mode to the Display Mode.
m3/h
0 : : : 100
3274m3
Touch SHIFT + 
key
1st line: Actual instantaneous flow rate [FR]
2nd line: Bar graph indicating instantaneous flow rate
3rd line: Totalized forward flow rate [FTL]
Setting switches
Hold the 
switch for 2 seconds.
Touch 
and 
switches simultaneously.
IM |
