OPERATING YOUR BREVILLE COMPACT SMART OVEN™ – BAGEL
BAGEL FUNCTION
Elements
Top and bottom heating elements cycle on and off to regulate the correct temperature.
Rack Position
Middle rack height position.
Optional Settings
FROZEN FOODS button.
The BAGEL function crisps the insides of your cut bagel while only lightly toasting the outside. This function is also ideal for toasting thick sliced speciality breads which require one side to be toasted more than the other.
NOTE
If you like your bagel halves equally crisp on both the top and bottom, we recommend using the TOAST function to toast your cut bagel.
1.Insert the wire rack into the top rack height position. The wire rack should be positioned with the spokes facing upwards.
2.Slice each bagel into two equal halves
3.If toasting
NOTE
The upside of the bagel must always face upwards towards the top heating elements. This allows the topside to be crisp while the crust is only lightly toasted.
NOTE
For bagels, change the rack to the middle rack height position, cut the bagel in half, lengthways. The upside(cutside) of the bagel must always face upwards towards the top heating elements - so the topside(cutside) becomes crisp while the crust is only lightly toasted.
4.Close the oven door.
5.Turn the FUNCTION dial until the indicator reaches the BAGEL function. The left figure on the LCD screen indicates the preset browning or ‘Darkness’ setting ‘4’, while the right figure on the LCD screen indicates the preset number of bagel halves ‘2’.
6.The browning setting and number of bagel halves can be adjusted before or during the bagel cycle.
23
