Breville BTM800XL Stainless, BOV800XL manual Operating your Breville Smart Oven cookie

OPERATING your Breville Smart Oven™ - cookie

10.The pizza cycle can be stopped at any time by pressing the START/CANCEL button. This will cancel the cycle. The button surround illumination will go out and the LCD screen will illuminate blue.

A note on pizza stones

When using a pizza stone, it is necessary to first heat the stone (without a pizza) for optimum results.

1.Insert the wire rack into the middle rack height position. The wire rack should be positioned with the spokes facing upwards.

2.Place the pizza stone on the center of the wire rack so air flows around the sides of the stone.

3.Close the oven door.

4.Turn the bottom dial to the 6 pizza size. The top figure on the LCD screen indicates the preset temperature of ‘450°F’, while the bottom figure on the LCD screen indicates the ‘6 SIZE’. The preset CONVECTION setting and preset FROZEN FOODS setting will also be displayed.

5.Press the START/CANCEL button to activate this setting. The button surround will illuminate red, the oven alert will sound and the LCD screen will illuminate orange.

6.The LCD screen will indicate a blinking ‘PREHEATING’. Once the oven has reached the set temperature, the temperature alert will sound.

7.The timer will be displayed and automatically begin to count down in one minute increments.

8.At the end of the pizza stone heating cycle, the oven alert will sound three times. The START/CANCEL button surround will no longer illuminate red and LCD screen will illuminate blue.

9.Now carefully place the frozen pizza on the heated pizza stone.

NOTE

If cooking a fresh pizza, we recommend using protective hot pads or insulated oven mitts to remove the entire wire rack with pizza stone, and place on the open oven door or bench. This will assist in transferring the fresh pizza dough onto the heated pizza stone. Always use protective hot pads or insulated oven mitts to re- insert the wire rack with pizza stone and pizza, inside the oven.

10.Select the desired pizza setting and press the START/CANCEL button to restart the pizza cycle.

38

BOV800XL_IB_H11.indd 38 21/03/11 9:57 AM