Breville BOV800XL Oven will not switch on, Would like to have the oven, LCD default settings back

Models: BTM800XL Stainless BOV800XL

1 160
Download 160 pages 9.01 Kb
Page 53
Image 53

TROUBLESHOOTING

POSSIBLE PROBLEM

EASY SOLUTION

 

 

 

Check that the power plug is securely inserted into the outlet

Oven will not switch "ON"

Insert the power plug into an independent outlet

Insert the power plug into a different outlet

 

 

Reset the circuit breaker if necessary

 

 

 

The oven will remember the last setting used for each

I would like to have the oven

function unless you remove the plug from the wall outlet.

To restore the oven’s default settings for each function,

LCD default settings back

remove the plug from the wall outlet. Wait 5 seconds, then

 

 

plug back in.

 

 

 

The oven goes into standby mode if not used for 10 minutes.

 

When in standby mode, the LCD screen will cease to

The LCD display light has

illuminate, however all function options will still be visible.

gone out

To re-activate the oven out of standby mode, press the

 

START/CANCEL button on the control panel, or turn any

 

dial. The LCD screen will re-illuminate.

 

 

The pizza does not cook

Some large pizzas may brown unevenly in compact ovens.

Open the oven door half way through the cooking time and

evenly

turn the pizza 90 degrees for more even browning.

 

 

 

The Magnetic Auto-Rack

Always open the door slowly and in a controlled manner

Eject comes out too far when

when the wire rack is inserted into this rack height position

I open the door

to prevent the wire rack from ejecting too quickly.

 

 

I cannot select the FROZEN

The FROZEN FOODS button is only selectable during the

FOODS button

TOAST, BAGEL, PIZZA and COOKIE functions.

 

 

Steam is coming out from the

This is normal. The door is vented to release steam created

top of the oven door

from high-moisture content foods such as frozen breads.

 

 

The heating elements appear

Element IQ™ accurately controls the heat inside the oven by

pulsing the power in the heating elements in short bursts.

to be pulsing

This is normal.

 

 

 

Water is dripping onto

This is normal. The condensation created from high

moisture content foods such as frozen breads will run down

benchtop from under door

the inside of the door and can drip onto the bench.

 

 

 

 

To ensure the measurements are standardized, the oven

The temperature reading

temperatures have been calibrated in the TOAST position

on the LCD screen doesn't

(center of the middle rack with no tray in place). Re-check the

temperature in this position, ensuring not to open the oven

match the temperature

door for 10 minutes as heat will escape each time the door

measured inside the oven.

is opened. Note that the ‘preheat’ alert sounds at 75% of the

 

target temperature. See below for full explanation.

 

 

 

53

BOV800XL_IB_H11.indd 53

21/03/11 9:57 AM

Page 53
Image 53
Breville BOV800XL Oven will not switch on, Would like to have the oven, LCD default settings back, LCD display light has