Delta Electronics ASDA-AB manual Inf, Sdev, Pdev

P2 - 33▲

		Chapter 7 Servo ParametersASDA-AB Series
INF	Easy Setting of Input Filter		Communication Addr.: 0221H
Default: 0			Related Section:
Applicable Control Mode: ALL			Section 6.3.6
Unit: N/A

Range: 00 ~ 19

Settings:

A

B

not used

•A: Speed selection

A=0 Low speed

A=9 High speed

•B=1: Enable this function

P2 - 34

SDEV	Overspeed Warning Condition	Communication Addr.: 0222H
Default: 5000		Related Section: N/A

Applicable Control Mode: S

Unit: r/min

Range: 1 ~ 5000

Settings:

This parameter is used to set the over speed condition of the drive fault code. (See P0-01)

P2 - 35

PDEV	Excessive Error Warning Condition	Communication Addr.: 0223H
Default: 30000		Related Section: N/A

Applicable Control Mode: Pt, Pr

Unit: pulse

Range: 1 ~ 30000

Settings:

This parameter is used to set the excessive error condition of the drive fault code (See P0-01) . As for the proportion value setting of position excessive error warning condition, please refer to P2-63.

Revision January 2009 7-63