Delta Electronics ASDA-AB manual DO1, Digital Output Terminal 2 DO2 Communication Addr H, DO3

P2 - 18

		Chapter 7 Servo ParametersASDA-AB Series
DO1	Digital Output Terminal 1 (DO1)		Communication Addr.: 0212H
Default: 101			Related Section:
Applicable Control Mode: ALL			Table 7.B
Unit: N/A
Range: 0 ~ 112

Settings:

This parameter is used to determine the function and status of DO1.

A

B

not used

•A: DO Function Settings: For the setting value of P2- 18 ~ P2-22, please refer to Table 7.A.

•B: DO Enabled Status Settings:

0:Normally closed (contact b)

1:Normally open (contact a)

Please re-start the servo drive after parameters have been changed.

P2 - 19

DO2	Digital Output Terminal 2 (DO2)	Communication Addr.: 0213H
Default: 103		Related Section:
Applicable Control Mode: ALL		Table 7.B
Unit: N/A

Range: 0 ~ 112

Settings: See P2-18 for explanation.

P2 - 20

DO3	Digital Output Terminal 3 (DO3)	Communication Addr.: 0214H
Default: 109		Related Section:
Applicable Control Mode: ALL		Table 7.B
Unit: N/A

Range: 0 ~ 112

Settings: See P2-18 for explanation.

Revision January 2009 7-57