Honeywell K5404V9 manual Resolution Gauge

Recorded Video

Fig. 31. Image size: menu and report, available in a camera window during a Retrieval session.

Resolution gauge: the resolution at which the recording was made

During a Retrieval session, a resolution gauge reports if a camera window’s size is smaller-than-optimal, optimal or greater-than-optimal for the recorded resolution. The icon is shown in figures 32 (for NTSC) and 33 (for PAL).

Fig. 32. Resolution gauge for NTSC: indicates resolution setting for video recorded by that camera.

Fig. 33. Resolution gauge for PAL: indicates resolution setting for video recorded by that camera.

Set a Multi-Media unit to use either NTSC or PAL cameras; both types cannot be used on the same unit.

The resolution of the recorded video is shown by the resolution gauge. See tables 12 and 13. The red dot in the upper row of the icon indicates that the resolution applies to recorded video.

Table 12

Recording: resolution selection for NTSC camera (pixel × pixel)

resolution

gauge

160×120

legacy*

n/a

320×240

640×240

640×480†

704×480†

*Legacy, used by older Multi units, is included for compatibility. This setting has no icon.

† Not available on Multi-Media LT units.

3–7