Honeywell K5404V9 Searching for Motion, Setup, To enable motion detection, Starting a Session

5 Searching for Motion

5.1Setup

Before you can use motion search, your Multi SA needs to run a maintenance session to enable Motion detection for each of the cameras whose video may eventually be searched for motion.

!48 To enable motion detection

•See the Admin User’s Guide.

Motion search works only if “motion detection” was enabled during the recording of the video that you plan to search.

Fig. 36. Motion button, for starting a Motion session.

Starting a Session

Fig. 37. Online reminder of what comes next when searching for motion.

!49 To start a Motion Search session

On the Site action tab, either:

•right-click the name of the site you plan to search. Click Motion on the menu that appears.

•click the name of the site you plan to search, then the Motion button on the View toolbar.

5–1