Honeywell K5404V9 Source Event Log Alar View operator, Multi-Media unit, Outside world, Video tab

View: Operator Guide

Table 15

Event default settings for log and alarm

source	event	log	alar
			m
View operator	Session: connect, reject and	nil	nil
	disconnect
	Maintenance: configuration, security,	“	“
	system files, synchronize time, clear
	storage, clear stream
	Outputs: activate, deactivate*	“	“
Multi-Media unit	System: run-time failure, self-restart,	log by default	“
	reboot, no video recording, time
	server unusable, no synchronization
	in 24 hours, excessive system clock
	drift, SMART disk failure

outside world	Inputs: activate, deactivate
	Video: signal unlock, signal unlock
	Motion: Not on Event tab; on the
	Video tab.
customer-device	user defined: Not on Event tab; on
	the Serial Devices tab.

nil“

““

““

““

*Control Output 6 is unavailable as an event when Fault Relay is enabled. The Control Outputs on a Multi-Media LT unit remain available when its Fault Relay is enabled.

6–16