HP 4300dtns, 4200n, 4200dtnsl, 4200tn manual Enww

6

7

8

9

10

11

6Remove the jammed paper. If necessary, lift the black plastic guide that is located on the top of the fuser to gain access to the jammed paper. You can also turn the jam-clearing wheel that is located on the side of the fuser to attempt to eject the jammed paper.

CAUTION

Do not use a sharp object to clear paper from the fuser area. You might damage the fuser.

7Push the fuser firmly into the printer until the blue levers on both sides click into place.

8Install the rear output bin. Pull gently on the bin to make sure that the hinge pins are fully inserted.

9Plug the power cord into the printer.

10Replace the optional duplexer, if it was removed.

11Turn the printer power on.

12If a jam message persists, there is still jammed paper in the printer. Look for the jam in another location. (See “Jam locations” on page 96.)

After clearing all jams, you will need to send the print job again because the printer power has been turned off.

ENWW Clearing jams 105