HP 4300dtns, 4200n, 4200dtnsl, 4200tn manual Card or mass storage device optional hard disk on

Message	Explanation or recommended action
CARTRIDGE FAILURE	The print cartridge still contains part of the sealing tape.
For help press	1. Try to remove the sealing tape.
alternates with	2.	If it cannot be removed, insert a new print cartridge and return the faulty print cartridge to
RETURN FOR REPLACEMENT		receive a replacement.
For help press
CHECKING PRINTER	The printer is checking for possible jams or paper that was not cleared from the printer.
CHOSEN PERSONALITY NOT	The printer received a request for a personality that does not exist in the printer. The print job is
AVAILABLE	canceled.
For help press		To see a list of available personalities, print a configuration page. (See “To print a
alternates with		configuration page at the control panel” on page 84.)
To continue press
CREATING CLEANING PAGE	The printer is printing the cleaning page.
	￿	Follow the instructions on the printed cleaning page to complete the cleaning.
DETECTABLE SIZE IN TRAY	The printer detects that there is a standard size of paper loaded in the tray indicated.
[XX]	1.	If the paper is a standard size, move the knob to the Standard position. (See “Loading
For help press	2.￿	tray 2 or an optional 500-sheet tray” on page 43.)
alternates with		If the paper is a custom size, make sure that the guides are positioned correctly in the tray.
Recommend move switch to
STANDARD
DIFFERENT PAPER SIZES IN	The stapler cannot align the paper for stapling if different paper sizes are in the job. Printing
JOB	continues, but the job will not be stapled.
		If stapling is required, modify the job.
DISK DEVICE FAILURE	The EIO disk had a critical failure and can no longer be used.
To enter menus press	￿	Remove the EIO disk and replace it with a new one. (See “To remove an installed EIO card
		or mass storage device (optional hard disk)” on page 173.)
DISK FILE	The	requested operation could not be performed. You might have attempted an illegal
OPERATION FAILED	operation, such as trying to download a file to a non-existent folder.
To enter menus press	￿
DISK FILE	The EIO disk is full.
SYSTEM IS FULL		Delete files from the EIO disk and then try again. Use the Device Storage Manager in
To enter menus press		HP Web Jetadmin to download or delete files and fonts. (See the HP Web Jetadmin
		software Help for more information.)
DISK IS	The EIO disk is protected, and no new files can be written to it.
WRITE PROTECTED	￿	Use the Device Storage Manager in HP Web Jetadmin to disable the write protection.
To enter menus press
DUPLEXER ERROR	The optional duplexer has an error.
REMOVE DUPLEXER	￿	Turn off the printer power and reattach the optional duplexer. (Any print jobs at the printer
Install duplexer with		might be lost.)
power off
EIO [X] disk	The disk accessory in EIO slot [X] is initializing.
initializing	￿
EIO DISK [X]	The EIO disk is not working correctly.
NOT FUNCTIONAL	1.	Remove the EIO disk from the slot indicated by [X]. (See “To remove an installed EIO
For help press		card or mass storage device (optional hard disk)” on page 173.)
	2.	Replace it with a new EIO disk. (See “To install EIO cards or mass storage devices” on
		page 173.)
EIO [X] disk	The disk accessory in EIO slot [X] is initializing.
spinning up

ENWW Understanding printer messages 115