Message

Explanation or recommended action

 

ENV FEEDER LOAD

A job has been sent to the optional envelope feeder and the feeder is not loaded with the correct

[SIZE]

envelope size.

 

 

1. Load the correct size in the feeder.

 

 

2. Make sure that the envelope size is set correctly on the Paper Handling menu at the printer

 

 

control panel. (See “Paper Handling menu” on page 154.)

 

 

3. Pressing PAUSE/RESUME will prompt a question asking if you would rather print on another

 

 

available size of envelope in the printer. Use UP ARROW (

) or DOWN ARROW ( ) to

 

 

scroll through the available sizes, and then press SELECT (

) to select one.

 

 

 

FLASH DEVICE

The flash DIMM had a critical failure and no longer can be used.

 

FAILURE

￿ Remove the flash DIMM and replace it with a new one. (See “To install memory” on

 

For help press

 

page 170.)

 

 

 

FLASH FILE OPERATION

The requested operation could not be performed. You might have attempted an illegal

FAILED

operation, such as trying to download a file to a non existent folder.

For help press

 

 

 

 

 

 

FLASH FILE

The flash DIMM is full.

 

SYSTEM IS FULL

￿ Delete files from the flash DIMM. Use Device Storage Manager in HP Web Jetadmin to

 

For help press

 

download or delete files and fonts. (See the HP Web Jetadmin software Help for more

 

 

information.)

 

 

 

FLASH IS

The flash DIMM is protected, and no new files can be written to it.

WRITE PROTECTED

￿ Use Device Storage Manager in HP Web Jetadmin to disable the write protection. (See the

 

For help press

 

HP Web Jetadmin software Help for more information.)

 

 

 

 

INSERT OR CLOSE TRAY [XX]

The specified tray is open or missing.

 

For help press

￿ Insert or close the tray for printing to continue.

 

 

 

INSTALL CARTRIDGE

The print cartridge has been removed and must be reinstalled for printing to continue. Make

For help press

sure that the print cartridge is fully inserted.

 

 

 

INSTALL FUSER

The fuser is not fully seated or has been removed and must be reinstalled for printing to

For help press

continue.

 

 

1.

If the fuser is in the printer, remove and reinstall it. If the fuser is not in the printer, install it.

 

2.

Push the fuser firmly into the printer until the blue levers on both sides click into place.

WARNING!

The fuser is very hot. To avoid minor burns, wait 30 minutes for the fuser to cool before removing it from the printer.

116 4 Problem solving

ENWW