HP 4200dtns Quality papers. See Scattered lines on, Blurred print on page 130. HP recommends

Item	Values	Explanation
FUSER MODES	[Paper Type]=	Configures the fuser mode associated with each
PLAIN	NORMAL	paper types.
PREPRINTED	HIGH1	Change the fuser mode only if you are experiencing
LETTERHEAD	LOW	problems printing on certain paper types. After you
TRANSPARENCY	HIGH2	select a type of paper, you can select a fuser mode
PREPUNCHED	RESTORE MODES	that is available for that type. The available selections
LABELS		might include some or all of the following modes:
BOND		NORMAL: Used for most types of paper.
RECYCLED		HIGH 1: Used for rough paper.
COLOR
CARDSTOCK>164 G/M2		LOW: Used for transparencies.
ROUGH		HIGH 2: Used for paper with a special or rough finish.
		The default fuser mode is NORMAL for all print media
		types except transparencies (LOW), and rough paper
		(HIGH 1).
		CAUTION
		Do not change the fuser mode for transparencies.
		Failure to use the LOW setting while printing
		transparencies can result in permanent damage to
		the printer and fuser. Always select Transparencies
		as the Type in the printer driver and set the tray type
		at the printer control panel to TRANSPARENCY.
		When selected, RESTORE MODES resets the fuser mode
		for each media type back to its default setting.
OPTIMIZE	There is no value to select.
HIGH TRANSFER	*Off	Set to ON if you are using highly resistive, lower-
	ON	quality papers. (See “Scattered lines” on page 130
		and “Blurred print” on page 130.) HP recommends
		using only HP paper and print media.
LINE DETAIL	*Off	Set to ON to improve the appearance of lines if
	On	scattered lines are appearing. (See “Scattered lines”
		on page 130 and “Blurred print” on page 130.)
RESTORE OPTIMIZE	There is no value	Returns to the defaults for the Optimize settings.
	to select.
RESOLUTION	300	Selects the resolution. All values print at the same
	600	speed.
	*FASTRES 1200	300: Produces draft print quality and can be used for
	PRORES 1200	compatibility with the HP LaserJet III family of
		printers.
		600: Produces high print quality for text and can be
		used for compatibility with the HP LaserJet 4 family of
		printers.
		FASTRES 1200: Produces 1200-dpi print quality for
		fast, high-quality printing of business text and
		graphics.
		PRORES 1200: Produces 1200-dpi printing for the best
		quality in line art and graphic images.
		Note
		It is best to change the resolution in the program or
		printer driver. (Program and printer driver settings
		override control panel settings.)

160 Appendix A Control panel menus ENWW