HP 4300dtns, 4200dtns, 4200n Running the cleaning page manually on, Cleaning page manually on

Item	Values	Explanation
RET	OFF	Use the Resolution Enhancement technology (REt)
	LIGHT	setting to produce print with smooth angles, curves,
	*MEDIUM	and edges.
	DARK	REt does not affect print quality if the print resolution
		is set to FastRes 1200. All other print resolutions
		benefit from REt.
		Note
		It is best to change the REt setting in the program or
		printer driver. (Program and printer driver settings
		override control panel settings.)
ECONOMODE	*OFF	Turn EconoMode ON (to save toner) or OFF (for high
	ON	quality).
		EconoMode creates draft-quality printing by reducing
		the amount of toner on the printed page.
		Note
		It is best to turn EconoMode on or off in the program
		or printer driver. (Program and printer driver settings
		override control panel settings.)
		CAUTION
		HP does not recommend full-time use of EconoMode.
		If EconoMode is used full-time, it is possible that the
		toner supply will outlast the mechanical parts in the
		print cartridge.
TONER DENSITY	1	Lighten or darken the print on the page by setting the
	2	toner density. Select a setting ranging from 1 (light) to
	*3	5 (dark). The default setting of 3 usually produces the
	4	best results.
	5	Note
		It is best to change the toner density in the program
		or printer driver. (Program and printer driver settings
		override control panel settings.)
AUTO CLEANING	*OFF	Clean the fuser automatically using this feature.This
	ON	setting is unavailable if an optional duplexer is
		installed. If a duplexer is installed, run the cleaning
		page manually. (See CREATE CLEANING PAGE (below)
		and “Running the cleaning page manually” on
		page 89.)
CLEANING INTERVAL	1000	If auto cleaning is on, set how often it runs. The
	*2000	intervals correspond to the number of pages the
	5000	printer has printed. This setting is unavailable if an
	10000	optional duplexer is installed.
	20000
AUTO CLEANING SIZE	Letter	If auto cleaning is on, set the size of paper that the
	A4	printer should use when it is cleaning the printer
		automatically. This setting is unavailable if an optional
		duplexer is installed.
CREATE CLEANING PAGE	There is no value	Press SELECT (	) to print a cleaning page manually
	to select.	(for cleaning toner from the fuser). Open the rear
		output bin. Follow the instructions on the cleaning
		page. For more information, see “Running the
		cleaning page manually” on page 89.
PROCESS CLEANING PAGE	There is no value	This item is available only after a cleaning page has
	to select.	been created. Follow the instructions printed on the
		cleaning page. The cleaning process might take up to
		2.5 minutes.

ENWW Configure Device menu 161