![](/images/new-backgrounds/1307992/307992105x1.webp)
Running a Calibration
NOTE: The following section applies to Windows 95, Windows 98, and Windows NT 4.0. Please refer to the “Running a Calibration in Windows 2000 Professional” section below for detailed information.
1.If you are checking the calibration of a battery
If you are calibrating a battery
2.Access the Battery Calibration tab.
■In Windows 95 select Start⊕Settings⊕ Control Panel⊕Power⊕Battery Calibration tab.
■In Windows 98 select Start⊕Settings⊕Control Panel⊕Power Management⊕Battery Calibration tab.
■In Windows NT 4.0 select Start⊕Settings⊕Control Panel⊕Compaq Power⊕Battery Calibration tab.
3.View the calibration reports in the Status column. The battery numbers in the Battery column correspond to the following locations:
Battery Number
1
2
3
Battery Pack Location
Computer battery bay
Computer DualBay
Computer MultiBay
4.Select any location number with “Needs calibration” beside it in the Status column.
5.Select the Start Calibration button.
Managing Power