Error code | Error message | Comment or clarification |
|
|
|
|
| or logical drive. |
|
|
|
2854 | Invalid SSP Adapter ID | The adapter ID is not a valid adapter ID that was |
|
| detected by the controller. |
2857 | Invalid Surface Scan Delay | — |
2861 | Controller does not support redundancy | The controller is not redundant or does not support |
| settings | redundancy settings. |
|
|
|
2864 | Invalid Preferred Path Mode | The specified value for the preferred path mode is |
|
| not valid, or the controller is not available. |
2865 | Invalid Preferred Path | The specified preferred path is not a valid chassis |
|
| slot for an available, active controller, or the |
|
| controller is not available. |
|
|
|
2866 | Failure opening capture file | — |
|
|
|
2867 | Failure opening input file | — |
|
|
|
2868 | Failure opening error file | — |
|
|
|
2877 | There are no suitable spares available | HP SSA found no drives that could be used as spares |
|
| for the specified array. |
|
|
|
2880 | Invalid Physical Disk Type Specified | — |
|
|
|
2882 | Invalid MNP delay | The specified value for MNP delay is invalid. |
|
|
|
2883 | Invalid Cache Logical Drive | The specified caching logical drive ID is invalid. |
|
|
|
2884 | Invalid Caching Array | The specified caching array ID is invalid. |
|
|
|
2885 | Error creating Caching Logical Drive | — |
2886 | Error creating Caching Array | — |
2887 | Error modifying Caching Volume | — |
2888 | Unable to modify Caching Arrays | Caching arrays cannot be modified once created. |
2889 | The requested Array modification is invalid | Error specifying the list of drives when reconfiguring |
|
| an array |
3000 | Invalid Option | The value of the option supplied to this parameter is |
|
| invalid. |
3001 | Invalid Command | The command is invalid. |
|
|
|
3002 | Command Failed | The controller returned an error for a command. |
|
|
|
3003 | License Key Delete Failed | HP SSA is unable to delete the license key. |
|
|
|
3004 | Invalid Sector Size | — |
3005 | Cannot delete Array | — |
|
|
|
3006 | Invalid Number of Parity Groups | — |
3007 | Chassis name is too long | — |
3008 | Chassis name is already in use | Another controller is already using the entered |
|
| chassis name. |
|
|
|
3009 | Auto Configure failed | The Auto Configure mode was unable to complete |
|
| auto configuration. |
3010 | Cannot extend logical drive, not enough | — |
Page 108
Image 108
