HP UX vPars and Integrity VM v6 manual Using the Modify menu

Table 7 VM Manager Create menu options

Menu Selection	Action Summary	More Information
Create→Virtual Machine...	Starts the Create Virtual Machine	“Creating virtual machines” (page 79)
	wizard, which guides you through the
	procedure of creating a virtual
	machine. Each step presents a dialog
	that asks you to specify required
	information.
Create→Virtual Switch...	Creates a new virtual network switch	“Creating virtual switches” (page 100)
	(vswitch) on the host. The vswitch is
	used by the virtual machines to
	connect to the network: one or more
	virtual machines connect to the
	vswitch, and the vswitch is connected
	to a host's physical network device.

Using the Modify menu

The VM Manager Modify menu allows you to perform actions on a selected virtual machine. The options displayed when you select the Modify menu using VM Manager from HP Matrix Operating Environment are shown in Figure 46. The options are available only when you are in a VM Properties view or in a view in which you have selected a virtual machine, such as on the VM Host Virtual Machines tab. You can only modify one virtual machine at a time.

If the virtual machine being modified is an HP Serviceguard package, you must make the same modifications to the virtual machine on the other VM Hosts in the cluster.

NOTE: When you use VM Manager from HP SMH, this menu includes an additional option that allows you to modify WBEM credentials. This option can be available from any VM Manager view.

Figure 46 VM Manager Modify menu

Table 8 describes the Modify menu options. More information about the various modification options is provided in “Modifying virtual machines” (page 84). More detailed information is provided by the VM Manager help and the HP Integrity Virtual Machines Installation, Configuration, and Administration manual.

74 Using VM Manager menus