Step 2. Loading the Diagnostics
1. Stop all application programs running on the operating system.
2.Stop the operating system.
3.Turn off the power.
4.If you are loading the Standalone Diagnostics and running them from an ASCII
terminal, do the following:
ŸThe attributes for the terminal must be set to match the defaults of the diagnostics.
Ÿ If you need to | change any settings, record the | normal | settings, and make | |
sure | the terminal | attributes are set to work with | the | diagnostics. If needed, |
see | “Running the | Diagnostics from a TTY Terminal” on | page 97. | |
Ÿ Return to substep 5 when you finish checking the attributes.
5.Turn on the power.
a.When the keyboard indicator displays, press the numeric 5 key on the keyboard to load the Standalone Diagnostics or the numeric 6 key on the keyboard to load the Online Diagnostics.
b.Enter requested passwords.
c. Follow any instructions to select a console.
6. When | the | Diagnostic | Operating Instructions display, go to Step 3. If you are |
unable | to | load the | diagnostics, go to “Problem Determination When Unable to |
Load | Diagnostics” on | page 164. | |
152 RS/6000 Enterprise Server Model H80 Series User's Guide
