Emergency Eject
Note: | Execute | the following | procedure | only | in an emergency (such as when the |
tray | will not | eject even | though you | have | pressed the unload button). |
1.Insert a small diameter rod, such as a straightened paper clip, into the emergency eject hole. (Refer to the illustration below for the location of the emergency eject hole.)
2. | Push | in | the tool until | you feel resistance. | |
3. | Maintain | a small amount of pressure | on the rod while pulling on the tray with | ||
your | fingernail. |
|
| ||
4. | Pull | the | tray open and | remove the | disc. |
1 | Headphone Jack | 4 | Tray | Opening |
| |
2 | Volume | Control | 5 | Emergency Eject | Button | |
3 | Status | Light | 6 | Load/Unload Button | ||
Note: | Normally the tray makes a | ratcheting | sound | when you pull it open using the | ||
above | procedure. |
|
|
|
| |
20 RS/6000 Enterprise Server Model H80 Series User's Guide
